Teledyne LeCroy PCIe Gen3 M.2 Socket3 Adapter Quick Start - Manual (Page 2)

Components Connections
The Teledyne LeCroy PCIe to M.2 Socket 3 Adapter for PCI Express 3.0
kit has the following components:
•
M.2 Socket 3 Adapter card (Supporting M-Key and hybrid
B/M Key Devices)
•
Power supply 12V @ 3A
Inspect the received shipping container for any damage. Unpack the
container and account for each of the system components listed on the
accompanying packing list. Visually inspect each component for absence
of damage.
In the event of damage, notify the shipper and Teledyne LeCroy. Retain
all
shipping materials for shipper’s inspection.
The adapter can be used with a standard Teledyne LeCroy PCIe
interposer and Teledyne LeCroy analyzer to capture all PCIe data traffic
passing through the interface, allowing visibility to virtually all types of
protocol problems that may affect device performance or reliability.
In addition, if an M.2 host port is available, Teledyne LeCroy offers
specialty interposers designed for M.2 devices that can be used as a
direct traffic probe and analysis tool with any of our Summit™ product
family of analyzers.
2
Installation
Insert DUT into the M.2 connector on the adapter and secure with nut and
standoff. The standoff has a nut on the bottom side which can be
removed by hand or with a nut driver (see drawings on next two pages).
Once the DUT is properly installed in the adapter you can plug the
adapter in to a PCIe slot.
3