Teledyne LeCroy SierraFC Automation API - Manual (Page 37)

LeCroy Corporation SierraFC M8-4 API Reference Manual Manual Version 1.00
37
4.1.10 ITrace::GetTriggerPacketNum
HRESULT GetTriggerPacketNum (
[out, retval] long* packet_number );
Retrieves the trigger packet number.
Parameters
packet_number Zero based number of the packet where the trigger occurred
Return values
Remarks
Example
WSH:
CurrentDir = Left(WScript.ScriptFullName, InstrRev(WScript.ScriptFullName, "\"))
Set Analyzer = WScript.CreateObject("LeCroy.FCAnalyzer")
Set Trace = Analyzer.MakeRecording (CurrentDir & "Input\test_ro.rec")
TriggerPacket = Trace.GetTriggerPacketNum
Trace.Save CurrentDir & "Output\trigger_portion.sat", CInt(ErrorPacket)-5,
CInt(ErrorPacket)+5
Trace.ExportToText CurrentDir & "Output\trigger_portion.txt", CInt(ErrorPacket)-5,
CInt(ErrorPacket)+5
C++:
See example for ITrace::GetPacketsCount .