Teledyne LeCroy WS-GPIB - Manual (Page 11)

EC Declaration
of Conformity
89/336/EEC with Amendments 92/31 EEC and 93/68/EEC
for Electromagnetic Compatibility. This declaration is
based upon compliance of the WS-GPIB to the following
standards:
EN 61326:1997+A1:1998
EMC requirements for electrical equipment for
measurement, control, and laboratory use.
EN 55022:1998+A1:2000+A2:2003 Radiated Emissions
(Class A)
EN 61000-4-2:1995+A1:1998+A2:2001 Electrostatic
discharge(+4kV contact discharge; +8kV air discharge)
EN61000-4-3:2002 Radio-frequency electromagnetic
field 3V/m (unmodulated, r.m.s.) 80% AM (1kHz)
LeCroy Corporation
700 Chestnut Ridge Road
Chestnut Ridge, NY 10977–6499
Tel: (845) 578 6020, Fax: (845) 578 5985
Internet: www.lecroy.com
© 2006 by LeCroy Corporation. All rights reserved.
LeCroy, ActiveDSO, ProBus, JitterTrack, WavePro, WaveMaster, and Waverunner
are registered trademarks of LeCroy Corporation. Information in this publication
supersedes all earlier versions. Specifications subject to change without notice.