Teledyne LeCroy WS-GPIB - Manual (Page 10)

„ Specifications
Product Specifications
Item Specifications
Power feed Bus-powered
USB standard
Conforms to USB Specification
Revision 2.0
USB connector Type A
GP-IB connector Amphenol 24-pin (male)
Power consumption 350mA at the maximum(during operation)
Temperature, operating 5
°to +40°C
Temperature, storage -40
o
to +71
°C
Humidity, operating < 80% RH (non-condensing)
Altitude, operating 3048 m (10,000 ft) max at < 25
o
C
External dimensions 61 (W)
× 22 (H) × 62 (L) (mm)
Cable length 1,500 (mm)
Mass Approx. 105 g
Applicable PC
(GP-IB side)
PC/AT-compatible PCs equipped with a
National Instruments-compatible GP-IB
card
Applicable device
(USB side)
WaveSurfer series Oscilloscopes
∗ The source voltage is supplied from the USB port.
∗∗ The appearance or parts of the specifications subject to change without prior
notice.
Certifications
Meets intent of the European Council Directive