Teledyne LeCroy OC1021 Oscilloscope Cart - Manual (Page 8)

8
Illustration 12: Firmly tighten the 4 Short Screws and Large Lock Washers into the Bottom Tray as shown.
Illustration 13: Firmly tighten the 6 Short Screws and Large Lock Washers into the Legs as shown.
Illustration 14: Carefully stand the cart upright as it will sway somewhat. Adjust the Support Bar so that the bottom is 15.5” from
the Bottom Tray, ensure that the cart is vertical, then firmly tighten the screws on the Support Bar. Adjust the Top Shelf to the topof
the Posts, firmly tighten the 4 Set Screws, Knobs, Shoulder Screws, and the 2 Long Screws in the Legs.
!
!
12 14
13
15.5”
10 Large
Lock Wash-
ers
10 Short
Screws
Small Wrench
Large Wrench