Teledyne LeCroy HDO Oscilloscope Rackmount - Manual (Page 8)

HDO Oscilloscope Rackmount Accessory
6 922646-00 Rev A
Pre-Installation Requirements
Tools
A standard Phillips (#2 head) screwdriver is required for the light assembly of your HDO Oscilloscope
Rackmount.
Oscilloscope
Be sure to prepare your HDO oscilloscope for rack mounting by performing the following:

Power down the oscilloscope.

Unplug the AC Power Plug from the back panel of the oscilloscope.

With the feet rotated to the position shown below, flip up the feet of your oscilloscope so the
instrument lies flat.