Installing the device, Englishenglishenglishenglishenglish – Asus GPS-BT100 User Manual
Page 6
6
6
6
6
6
EnglishEnglishEnglishEnglishEnglish
Installing the device
With the supplied accessories, you can install, charge, and use the device in
your vehicle to get your GPS information while on the road.
To use and charge the device inside your car:
1.
Insert the windshield holder foot to the hole at the back of the device
until it fits in place.
2.
Position the device on the car windshield or window with its top panel
facing out. Refer to the illustration below.
3.
Press the windshield holder suction caps firmly against the windshield
or window until the device is firmly in place.
4.
Connect the travel charger plug to the Y-cable.
5.
Connect the Y-cable mini-USB plug to the mini-USB port on the device.
6.
Connect the Y-cable power plug to the I/O and power port adapter.
7.
Connect the I/O and power port adapter to the PDA system
connector.
8.
Insert the travel charger adapter to the vehicle cigarette lighter.
9.
Follow the instructions in the next section to get your GPS
information.
1
1
1
1
1
8
8
8
8
8
4
4
4
4
4
5
5
5
5
5
7
7
7
7
7
ASUS >> GPS
3
6
9
#
1
4
7
2
5
8
0
6
6
6
6
6
1
3
6
9
#
2
5
8
0
4
7
2
2
2
2
2