Asus AP2400R-E1 User Manual

Page 34

Chapter 2: Hardware setup

2-20

9. Re-connect the 4-pin power plug

to the connector inside the cage.

When re-connecting the
power plug, place the PCI
cage close enough to avoid
pulling the power cable.

10. Before re-installing the PCI cage

into the chassis, check that all
cables on the PCI cage bay are
properly connected and routed.

Cables on the PCI cage bay

11. Take note of the two pegs on the

PCI cage bay. These pegs should
match the holes on the cage to
make sure it fits in place.

PCI cage pegs