Staub Electronics AA-SF-16M AUDIO AUTHORITY - 16 CHANNEL MATRIX AMPLIFIER WITH FLEXPORT INPUTS - Manual (Page 5)

SF-16M Matrix Amplifier Installation and Operation Guide 5
INTRODUCTION
The SonaFlex SF-16M is a unique blend of multi-channel amplification, flexible input options, audio matrix switching,
signal processing and open control capability. Built and designed in the U.S. with sound and video integrators in mind, the
SF-16M brings a new approach to common commercial and residential distributed audio applications - one multi-purpose
matrix amplifier that can be used in a variety of installations.
Key Features
• Audio matrix switching, signal processing and amplification in one unified system
• 16 analog RCA inputs combined with 2 Cat 5 “FlexPort” inputs allow for a total 20 mono/10 stereo inputs
• Optional Cat 5 FlexPort audio modules accept balanced line/mic, XLR, digital SPDIF and analog RCA audio sources
• 16 amplified outputs can be configured as mono, stereo or a combination of stereo and mono
• Up to four SF-16M units can be linked together to form a powerful 32 input x 64 output audio matrix
• Class-D amplification provides a conservatively rated 45 watts per channel (all channels driven) or 60 watts (8
channels driven) at 8 Ohms - stable to 2 Ohms
• Linear power supply delivers the warmth and musicality of an analog amplifier, combined with the responsiveness and
headroom required for dynamic music content
• Signal processing tools include hi and low shelf filters (Bass/Treble), hi and low pass filters and up to seven bands of
parametric equalization per output
• 10 preset sound scenes, a system-wide snap-shot of all volume and source settings, can be saved and recalled using
IR, RS-232 or IP commands
• 10 audio groups allow multiple outputs to be grouped together to share volume ramping, muting, source selection and
more
• Compatible with virtually any control system available today using RS-232, Ethernet or IR commands
• Front panel VFD display allows for access to commonly used settings - PC configurator, available for download,
allows for more advanced setup
FlexPort Cat 5 Audio Inputs
• Four compatible FlexPort audio modules: FPM-U Stereo RCA, FPM-D Digital Coax/Optical Audio, FPM-X Mic/ 1/4” TRS
Audio and FPM-B Balanced Audio (See Appendix A for detailed information)
• Provides a mixture of consumer and pro audio sources such as MP3 players, audio streaming devices, microphones,
audio mixers, paging microphones and more
• FlexPort modules can be located up to 500 feet away from the SF-16M giving flexibility in audio source placement
Control Interfaces
• Ethernet
• RS-232 Serial
• 2 contact closure inputs to trigger audio overrides and scenes
• Rear panel IR input (3.5 mm jack)
• Front panel IR sensor
• Front panel capacitive touch buttons and knob with LCD screen
Carton Contents
• SF-16M 16 Channel Matrix Amplifier
• Power Cord
• Rack ears
• DB-25 cable
• User manual
Other Materials You May Need
• Speakers and cabling
• Audio sources, microphones, audio mixers
• Patch cables (Ethernet, RCA)
• Infrared receiver
• Third party programmable remote or touchscreen interface
• USB 1.1 or USB 2.0 compliant drive