Staub Electronics AA-SF-16M AUDIO AUTHORITY - 16 CHANNEL MATRIX AMPLIFIER WITH FLEXPORT INPUTS - Manual (Page 12)

12 SF-16M Matrix Amplifier Installation and Operation Guide
SF-16M CONNECTIONS - Audio Override (Contact Closure)
The SF-16M provides two “Audio Override” contact closure inputs, which allow pushbuttons, partition wall contacts, and
other contact sensors to trigger the system. Audio override provides a convienent method of temporarily switching to an
alternate audio input when a sensor is triggered.
A practical example of this feature is a conference hall with movable partition walls. See Figure 12. When the partition
closes to create individual rooms, a partition wall contact closure (Override 2 in the example) triggers the SF-16M to
switch to a microphone input located in one partion area. When the partition wall opens, the SF-16M returns to its default
audio input. Override 1 can trigger the same behavior or a different behavior.
Figure 12
NOTE: In order for Audio Override to function, all settings must be programmed using the PC configuration software,
available for download on the SF-16M product page.
SF-16M CONNECTIONS - System Trigger (5V-24V AC/DC)
The System Trigger input on the SF-16M allows equipment such as AV receivers or power managment devices to put the
SF-16M in standby when not in use, thereby greatly conserving energy usage.
To enable the System Trigger:
1. Make system trigger connections as illustrated in Figure 13.
2. Power the SF-16M, then apply power to the triggering device.
3. Using the front panel menu (see page 17) or the PC configurator, enable “System Trigger”
Figure 13
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SPEAKER OUTPUTS (CLASS 2 WIRING)
ETHERNET
USB
SERIAL IN
SERIAL OUT
LINK
SPEED
MAIN IR
IN
MAIN IR
OUT
UNIT ID
DB25 AUDIO INPUT
CONTACT CLOSURE 5V - 24V AC / DC
DB25 AUDIO LOOP OUTPUT
LINE INPUTS
BUS
FlexPort 1
OUT IN
1 2 IN OUT
SYSTEM
TRIGGER
AUDIO
OVERRIDE
100-120V~ 50-60 Hz
1125W
Replace Fuses Only
with T 10A, 250V
Remplacer Uniquement
avec Fusible T 10A, 250V
Set voltage selector
and install correct
fuses according to
local power supply.
Régler le sélecteur
de tension et
installer les fusibles
corrects selon
l’alimentation locale.
4002715
1 3 5 7 9 11 13 15
A B C D E F G H
2 4 6 8 10 12 14 16
L
R
ETL LISTED CONFORMS
TO UL STD 60065
CERTIFIED TO CAN/CSA
STD C22.2 NO. 60065
Audio Authority® Corp. • 2048 Mercer Rd. Lexington, KY 40511 USA
800-322-8346 • 859-233-4599 • www.audioauthority.com Model SF-16M 16-Channel Matrix Amplifier PDF User Manual
VOLTAGE SELECTOR
FlexPort 2
OUT IN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SPEAKER OUTPUTS (CLASS 2 WIRING)
ETHERNET
USB
SERIAL IN
SERIAL OUT
LINK
SPEED
MAIN IR
IN
MAIN IR
OUT
UNIT ID
DB25 AUDIO INPUT
CONTACT CLOSURE 5V - 24V AC / DC
DB25 AUDIO LOOP OUTPUT
LINE INPUTS
BUS
FlexPort 1
OUT IN
1 2 IN OUT
SYSTEM
TRIGGER
AUDIO
OVERRIDE
100-120V~ 50-60 Hz
1125W
Replace Fuses Only
with T 10A, 250V
Remplacer Uniquement
avec Fusible T 10A, 250V
Set voltage selector
and install correct
fuses according to
local power supply.
Régler le sélecteur
de tension et
installer les fusibles
corrects selon
l’alimentation locale.
4002715
1 3 5 7 9 11 13 15
A B C D E F G H
2 4 6 8 10 12 14 16
L
R
ETL LISTED CONFORMS
TO UL STD 60065
CERTIFIED TO CAN/CSA
STD C22.2 NO. 60065
Audio Authority® Corp. • 2048 Mercer Rd. Lexington, KY 40511 USA
800-322-8346 • 859-233-4599 • www.audioauthority.com
Model SF-16M 16-Channel Matrix Amplifier PDF User Manual
VOLTAGE SELECTOR
FlexPort 2
OUT IN
PUSHBUTTON
OVERRIDE 1
POWER
MANAGEMENT
DEVICE
TO NEXT SF-16M
SYSTEM TRIGGER INPUT
OVERRIDE 2
PAR
TITION
PARTITION
CONTACT