Staub Electronics WB-600CH-SVCE-12 WATTBOX - SEQUENCING CHASSIS POWER CONDITIONER - 12 OUTLETS, 2 COAX, 2 ETHERNET - Manual (Page 5)

Pg. 5
WATTBOX™ 600 Chassis Series Owners Manual
© 2013 Wattbox ™
Important Safety Instructions
Please read and observe the following safety points at all times.
WARNING – Power Sources
Do not plug this Component into a power outlet that differs from the source indicated for safe use on the Component. If
you don’t know the type of electrical power that is supplied to your home, consult your local power company or a qualified
electrician.
WARNING – Liquid: Avoiding Electrical Shocks
Do not operate the Component if liquid of any kind is spilled onto or inside the unit. Do not operate the Component near rain
or water that’s spilled or contained (e.g., bathtub, kitchen or sink).
WARNING – Power Cord Safety
When routing the Component’s AC power cord, do not place it near heavy foot traffic areas (e.g., hallways, doorways, and
floors). Do not create a trip hazard with the power cord.
If the power cord’s protective jacket begins to rip or fray, exposing the internal wiring, shielding, etc., disconnect it from the
AC power source and discontinue use of the Component immediately. See the Warranty Information section of this owner’s
manual for important details.
WARNING – No User Serviceable Parts Inside
If, for any reason, the Component is not operating properly, do not remove any part of the unit (cover, etc.) for repair. Unplug
the unit and consult the Warranty Information section of this owner’s manual for important details.
CAUTION – Exposure to Heat
Do not expose the Component to direct sunlight or place it near wall heaters, space heaters, or any enclosed space prone
to temperature increase.
CAUTION – Proper Cleaning
In general, the only cleaning necessary for the Component is a light dusting. Unplug the Component from the wall outlet
before cleaning it. Do not use any type of liquid or aerosol cleaners.
CAUTION – Earthing
Component should be installed by certified service personnel to ensure that the product is connected to a socket-outlet with
a protective earthing connection
WARNING – Grounding and Polarization
Do not force the Component plug into an outlet that is not designed to accept a three-wire grounded-type AC plug (a three-
prong plug). This plug is designed to be inserted into a grounded-type outlet only. If this plug doesn’t fit directly inside the
outlet, do not attempt to force a connection. Never attempt to dismantle the plug in any way (or to alter the power cord). Do
not attempt to defeat the grounding feature by using a 3-to-2 prong adapter. If you have questions about grounding, consult
your local power company or a qualified electrician.
This Wattbox™ component requires a properly grounded outlet for safety and to protect connected equipment. If you’re not
sure if your home’s electrical wiring is properly grounded, have it checked by a qualified electrician.
If any rooftop devices such as satellite dishes, antennas, or any other component with wire being used that connects to the
Component, be sure the wire(s) is properly grounded. This protects against voltage surges and static charges.
Do not place any antenna near overhead power lines or any other power circuit. Do not touch any power line or power circuit.
Doing so may cause severe physical injury or possibly death.