Southern Folger A9300 MAXI-MORTISE - Manual (Page 6)

C42 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
Cylinder Data____________
s Standard cylinders – A9300 Series
Mortise Locks are provided with high
security six-pin tumbler mortise
cylinders 1-1/8" long. Provided with
two keys.
s Customer-supplied cylinders and
compression ring – Customer-
provided cylinders must be equipped
with a Schlage “L” type (clover-leaf)
Cam and must be 1-1/8" long.
s Cylinder and blocking rings – Will be
provided to suit the cylinder length
and door thickness when both locks
and cylinders are ordered. If not
specified, rings will be for 1-3/4" door
thickness.
s LCK (limited control key) –
Modification for Models A9336,
A9365, A9366, A9367. Factory
provided cylinder is modified to allow
change key a limited rotation to
retract the latchbolt. Master key is
unlimited and will operate both latch
and deadbolt. NOTE: LCK not
available with removable core
cylinders.
s Optional feature – Removable core
cylinders available on request.
s Trim accessories – The following trim
items will be provided:
s Thumbturn and escutcheon –
Furnished with Models A9304, A9313,
A9317, A9320, A9321, A9335, A9364
and A9367.
Removable thumbturn furnished with
Model A9319.
Supplied with tamper-resistant
No. 6 x 3/8" screws. Wood screws
also available on request.
FOLGER ADAM MECHANICAL LOCKS Key: Builders Hardware
Door: Swinging
Security
Level:
Minimum
A9300 MAXI-MORTISE ™
Thumbturn with escutcheon Mortise key cylinder