Southern Folger 4-1_2EH ELECTRIC HINGE - Manual

E8 Printed in USA FA Rev. 0 -1
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
Description______________
Electric hinges are investment-cast,
detention strength full-mortise hinges
for hollow metal doors and frames.
They are designed to transmit electric
current from field wiring in a doorframe
to an electric lock installed in the door.
Applications_____________
Electric hinges may be specified for use
in the detention environment on
administration area doors, or cell doors.
Hinge is non-load-bearing.
8VHZLWK
HD)0,QVWLWXWLRQDO+LQJHV
Standards Compliance___
Meets UL634 requirements, Switches and
Connectors. Uses UL recognized wire.
Screw hole locations conform to ANSI
A156.7 standards.
Standard Features_______
s Investment-cast hinge leaves –
0.188" thick, investment-cast stainless
steel.
s Supplied – With eight 1/4-20 x 1/2"
flat head tamper-resistant mounting
screws. Stainless steel screws are
provided for US32D finish.
s Stainless steel tubular pin – 9/16"
diameter tubular pin allows wiring to
pass from jamb to door.
s Reversible – Non-handed. Screw hole
locations conform to industry
standards.
Dimensional Data_______
NOTE: Dimensions above are for
general information and planning
purposes only, and should not be used
as templates.
FOLGER ADAM ACCESSORIES
4-1/2 EH
ELECTRIC HINGE
4-1/2EH