Logon, Logoff, Load utility setting – LevelOne IED-1020 User Manual
Page 49
Fig 63. Remove all COM ports
C
lick “File” from menu bar to show as Fig 64.
Fig 64. File
Click “Logon” from “File” to show the authentication screen as Fig 64. Enter password then
click on “OK” button to logon to the Serial Device Server. The default password is “admin”.
Fig 64. Logon
Click “Logoff” from “File” to logoff from the Serial Device Server.
Click “Load utility setting” from “File” to load utility setting file to the Serial Device Server.