LevelOne WAP-0008 - Manual (Page 114)

114
The following test will use the built-in 802.1X authentication method
such as EAP_TLS, PEAP_CHAPv2 (Windows XP with SP1 only), and
PEAP_TLS (Windows XP with SP1 only) using the Smart Card or
other Certificate of the Windows XP Professional.
 DUT and Windows 2000 RADIUS Server Setup
1. Setup Windows 2000 RADIUS Server. We have to change
authentication method to MD5_Challenge or using smart card or
other certificate on RADIUS server according to the test condition.
2. Setup DUT

Enable the 802
.1X (check the “Enable checkbox“).

Enter the RADIUS server IP.

Enter the shared key. (The key shared by the RADIUS
server and DUT).

We will change 802.1X encryption key length to fit the
variable test condition.
3. Setup Network adapter on PC

Choose the IEEE 802.1X as the authentication method.
(Figure 2)
NOTE. Figure 2 is a setting picture of Windows XP without
service pack 1. If users upgrade to service pack 1, then they can’t
see MD5-Challenge from EAP type list any more, but they will get
a new Protected EAP (PEAP) option.