LevelOne WAP-0008 - Manual (Page 109)

109
Wireless Client Mode: First, you need to connect your computer to
Network Storage via a RJ45 cable. Then use Scan AP feature of
Network Storage to connect to another wireless router. After Network
Storage connect to wireless router, your computer can communicate with
LAN Host#1 via Network Storage.
WDS only mode: WDSWireless Distribution system. This device also
supports this function. How to configure this in your environment? The
below Figure1 is for your reference. First, check which channel you want
to use. We choose channel 10 for the example. Scan other AP which
channel is 10 and also supports WDS function. Second, add the wireless
MAC address of Network Storage in this Wireless Router # 2. (Figure2).
And use Scan AP to find the wireless which SSID is “WR-2” and join it in
the list. Finally, LAN-Host #1 can find Wireless Router #2 and LAN-Host
#2.