LevelOne WAB-5120 - Manual (Page 22)

Chapter 3 Basic Settings
Factory Default Settings
We’ll elaborate the WAB-5120 factory default settings. You can re-acquire these parameters by default.
If necessary, please refer to the “ Restore Factory Default Settings ”.
Table 1 Factory Default Settings
Features Factory Default Settings
Username admin
Password admin
Wireless Device Name WAB-5120XXXXXX (X represents
the last 6 digits of Ethernet MAC
address)
Operating Mode AP
Data Rate Auto
LAN
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Gateway 0.0.0.0
Primary DNS Server 0.0.0.0
Secondary DNS Server 0.0.0.0
Spanning Tree Enable
802.11 Mode 802.11a/n
Country/Region United States
Channel Number 149
SSID LevelOne
Broadcast SSID Enable
HT Protect Disable
Data Rate Auto
Output Power Full
Channel Mode 20MHz
WMM Enabled
RTS Threshold (byte) 2346
Fragmentation Length (byte) 2346
Beacon Interval 100
DTIM Interval 1
Space in Meter 0
Flow Control by AP Disable
Security Open System