LevelOne IES-1081 - Manual (Page 59)

IES-1081 User Manual Page 59
SNMP v3
Add User:
1. Add User: C
Add User button. The SNMP V3 Setting window appears.
2. SNMP Version: C SNMP Version drop-down menu from SNMP Version drop-down
list to choose SNMPv3 No-Auth , SNMPv3 Auth-MD5 , SNMPv3 Auth-SHA , SNMPv3
Priv Auth-MD5 , or SNMPv3 Priv Auth-SHA .
 SNMPv3 No-Auth: Add a user using SNMP v3 without authentication.
 SNMPv3 Auth-MD5: Add a user using SNMP v3 with authentication.
Auth.
Password textbox and specify an authentication password.
 SNMPv3 Auth-SHA: Add a user using SNMP v3 with authentication. Auth.
Password textbox and specify an authentication password.
 SNMPv3 Priv Auth-MD5: Add a user using SNMP v3 with authentication and privacy.
Auth. Password textbox and specify an authentication password. Click in
Privacy PassPhrase textbox and specify a privacy pass phrase.
 SNMPv3 Priv Auth-SHA: Add a user using SNMP v3 with authentication and privacy.
Auth. Password textbox and specify an authentication password. Click in
Privacy PassPhrase textbox and specify a privacy pass phrase.
3. User Name: User Name textbox and specify a user name for user using
SNMP v3.
4. Access Mode: C Access Mode drop-down menu from Access Mode drop-down list
to choose Read Only or Read/Write .
 Read Only: Add a user using SNMP v3 with read-only access mode.
 Read/Write: Add an user using SNMP v3 with read-write access mode
5. Submit: C Submit button when you finished SNMP V3 Setting.