LevelOne WBR-6022 - Manual (Page 29)

28
6.2.5 Record IP camera
6.2.5.1 Set Record Path.
You MUST select one of the storages to store record files of each IP camera before the record function is enabled.
Press the “Setup” button of the IP camera that you want to setup on “Status” tag main page, you could give your IP
camera a friendly name, and you could change the User Name/Password here if necessary. And, you have to select
which network storage the IP camera image is saved to.
The screen would like this:
After pressing SAVE icon, the status page will indicate the storage information of each IP camera.
6.2.5.2 Record IP camera
When you are viewing the IP cameras, you could press “Record” button to record video from IP camera to network
storage till you press the “Stop” button.
6.2.5.3 Save Screen Shot
When you are viewing the IP cameras, you could press “Snap” button to get the current screen shot. The image file
would be saved into your PC.