LevelOne WBR-6022 - Manual (Page 24)

23
6 HomeGuard System setting
To use HomeGuard system, there are some steps you have to follow:
1.
pairing the IP cameras and network storages
2. Save the account/password info of IP cameras into router.
3. Setup the recording schedule if necessary
Here we go through each step:
6.1 Prepare the IP camera and storage
Supporting List
Currently the WBR-6022 only support following IP cameras.
Model Name Type Wired Wireless Remark
FCS-0010
WCS-0010
Cube Cam FCS-0010 WCS-0010
FCS-0020
WCS-0020
PTZ Cam FCS-0020 WCS-0020
FCS-1030v2
WCS-2030v3
Cube Cam FCS-1030 WCS-2030
FCS-1060
WCS-2060
PTZ Cam FCS-1060 WCS-2060
FCS-1081A Box Cam FCS-1081A
FCS-1091
WCS-1090
Box Cam FCS-1091 WCS-1090
FCS-1101 Box Cam FCS-1101
FCS-0030
WCS-0030
Cube Cam FCS-0030 WCS-0030 Coming soon!
PS: Before to search and register the IP Camera on the list, we recommend all the cameras have to reset to default
fault setting except the username & password.
Currently the WBR-6022 only supports following network storages.
Model Name H/W Recording Lift View Playback
FNS-1020 2.0 Up to 4 camera Up to 4 cameras One by one
PS: it cannot support the FNS-1020 v1, but only FNS-1020 H/W2.0 can work with WBR-6022!