LevelOne WBR-6003 - Manual (Page 9)

9
Hardware installation steps
Decide where to place your Wireless Router
You can place your Wireless Router on a desk or other flat surface. For optimal performance, place
your Wireless Router in the center of your office (or your home) in a location that is away from any
potential source of interference, such as a metal wall or microwave oven. This location must be close
to power and network connection.
Setup LAN connection
Wired LAN connection: Connect an Ethernet cable from your computer’s Ethernet port to one of
the LAN ports of the Wireless Router.
Wireless LAN connection: Locate the WBR-6003 at a proper position to gain the best transmit
performance.
3. Setup WAN connection
Prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet
backbone.
4. Power on
Connecting the power cord to power inlet and turning the power switch on, this product will
automatically enter the self-test phase. When it is in the self-test phase, the Status indicator will
be lighted ON, and the Status indicator will be continuously flashing once per second to indicate
that this product is in normal operation.