King Electric ESP Electronic Programmable - Manual (Page 4)

Programming tech support: (800) 603-5464 ext 111 / [email protected]
ESP-230 ESP-230
PROGRAMMING INSTRUCTIONS
With Battery Program Backup
ENERGY STAR
SAVE THESE INSTRUCTIONS
P1
P2
P3
P4
Program Temp. Mo Tu We Th Fr Sa Su
your customized schedule
P1
P2
P3
P4
Program Mo-Su Temp.
6:00am
8:00am
6:00pm
10:00pm
70°
62°
70°
62°
default schedule
Su
P M
T E M P S E T
M A N U A L
C O M F O R T
S W I N G
H O L D
H O U R [ S ]
H E A T
ROOM
TEMP
Reset
CLOCK
PROG
HOLD
SET
Upon initial power-up, the thermostat
will be flashing.
Press the “CLOCK” button, a day
will flash, then press the ARROW
buttons to set today's day.
2
ARROW buttons
CLOCK button
1
Press the ARROW buttons to stop
flashing.
Set Date Set Date 1
Su
T E M P S E T
M A N U A L
C O M F O R T
S W I N G
H O L D
H O U R [ S ]
H E A T
ROOM
TEMP
Reset
CLOCK
PROG
HOLD
SET
P M
Press the CLOCK button, the hour
will flash, then press the ARROW
buttons to set the hour.
1
2
To exit, press the “SET” button.
3
SET button
Set Time Set Time
Press the CLOCK button again to
set the minute with the ARROW
buttons.
2
Su
P M
T E M P S E T
M A N U A L
C O M F O R T
S W I N G
H O L D
H O U R [ S ]
H E A T
ROOM
TEMP
Reset
CLOCK
PROG
HOLD
SET
Press the “PROG” button to view
the P1 temperature or Preset 1
setting for that day.
View Current Program View Current Program
1
Press the “PROG” button multiple
times to scroll thru presents for P2,
P3, and P4.
2
Press the “SET” button to resume
normal operation.
3
PROG button
3a
Press the “SET” button and the
“PROG” button at the same time.
This puts you into Program mode and
the days will be flashing.
1
3 Press the “PROG” button to highlight
the time.
2
Press the ARROW buttons to select
all seven days or one at a time.
Press the ARROW buttons to adjust
time.
4
Press the “PROG” button again to
set the temperature for that specified
time.
5
For P2, P3, & P4 if all the days are identical for that
temperature, select all seven days for that P number.
8
Press the “SET” button to resume normal operation.
9
4
MoTuWeThFrSaSu
P M
T E M P S E T
M A N U A L
C O M F O R T
S W I N G
H O L D
H O U R [ S ]
H E A T
ROOM
TEMP
Reset
CLOCK
PROG
HOLD
SET
Push at
same time
6
Repeat these steps for all Presets: P1, P2, P3, and P4.
7
When you reach P1 again, press one of the ARROW buttons
to change the day and repeat Programming.
Program Adjustments Program Adjustments
3b
P1 Morning wake-up program
P2 Daily away from home program
P3 Evening home program
P4 Nightly sleep program
Energy Saving Schedule Energy Saving Schedule
Su
P M
T E M P S E T S W I N G
H O L D H O U R [ S ]
H E A T
ROOM
TEMP
Reset
CLOCK
PROG
HOLD
SET
5
Press the ARROW buttons to set
temperature.
1
Press the “HOLD” button until d:01
displays in the time window.
2
Press the ARROW buttons until
your number of days on vacation is
displayed. Up to 99 days can be
programmed.
3
To stop vacation hold press “SET”
button and normal operation is
resumed.
4
HOLD button
For extended days of absence:
Vacation Hold Vacation Hold
Su
P M
T E M P S E T M A N U A L
C O M F O R T
S W I N G H O L D
H O U R [ S ]
H E A T
ROOM
TEMP
Reset
CLOCK
PROG
HOLD
SET
6
To permanently hold the temperature:
Press “HOLD” button.
1
Press ARROW buttons to set
temperature.
2
To stop permanent hold press
“SET” button and normal
operation is resumed.
3
Permanent Hold Permanent Hold
CLOCK button
SET button
SET button
SET button
HOLD button
ESP programming.ai : 01/07
When looking at the bottom of the
unit the switches are as follows:
– upper left: backlight
– upper right: system on/off
– lower right: temperature sensor
C US
LISTED
UL
®