King Electric SRK02 connection kit User Manual
Page 5
Rev 10.21.12
www.king-electric.com
5
13
Insert cable and tighten junction box fitting.
Use wire nuts (not included in kit) to make connections between
supply wires and heating cable wires, in addition to the ground
wires. Not intended for use with aluminum wire.
14
IMPORTANT: For the warranty to be
valid, the installer,
customer and user must comply with all the requirements
outlined in these guidelines. All design information
provided in these instructions are based on a
“standard”
shake or shingle and metal roof applications. For any other
application or method of installation, consult a design
specialist.
ELECTRICAL CODES
Article 426 of the National Electrical Code (NEC), and Part
1, Section 62 of the Canadian Electrical Code (CEC),
govern the installation of SRP heating cables for roof and
gutter deicing
and must be followed.