King Electric Model KP - Manual (Page 3)

Installation Instructions
Portable Baseboard Heater
This product is proudly made in the USA
* SAVE THESE INSTRUCTIONS *
Grounded Plug
The cord provided with this heater has a grounding pin
on it for your safety and is to be used on a 3 pin
grounded receptacle (Figure A). If you have a receptacle
like in Figure B without a ground, an adapter like the one
in figure C will need to be installed to properly ground the
heater and the cord.
“CAUTION”– High Temperatures, Keep Electrical Cords, Drapes,
And Other Furnishings Away From Heater.
To reduce the risk of fire do not store or use Gasoline or any other
Flammable vapors and liquids in vicinity of this heater.
Clearance from objects.
Heater should be placed in an open area and on a flat
and level floor. Inlet and outlet of heater should never be
block or modified. Unobstructed airflow is important for
safe operation. Nothing should ever be placed on top of
the heater. Clearances from drapes is shown in the figure
above. 1 1/2 inches from front and 6 inches above the
heater. Any other items should stay at least 12 inches
from front of heaters. Back of heater can be against a
wall. Zero clearance from sides.
Note: Certain fabrics and materials discolor or may be-
come damaged by heat. Keep this heater away from all
items.
Clearance from Drapery
Grounding Methods
Annual Maintenance
The user can perform cleaning, no lubrication is required
since there are no moving parts, All other service is to be
done by a qualified service personnel.
Before servicing Turn thermostat control to Off, then re-
move plug from outlet. Wait till the heater is cool to per-
form any cleaning.
Heater element should be cleaned once a year with a
vacuum and paint brush to remove dust and lint that will
accumulate in the heater. This will also reduce the Black
Soot streaking that can happen over time.
Exploded view for Annual maintenance
Before Removing grill for cleaning the power must be
turned off at the breaker panel and the heater must be
cool.
Fig. 5
Fig. 6
Fig. 7