Alpine CDA-7892E - Manual (Page 21)

19
-EN
Music Sensor (Skip)
1
Momentarily press the g DN button once during CD
play to return to the beginning of the current track. If
you wish to access the beginning of a track further
back, repeatedly press until you reach the desired
track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access the
beginning of a track further ahead, press repeatedly
until the desired track is reached.
NOTE
The music sensor feature is functional in the play or pause mode.
Fast Forward and Backward
1
Press and hold the g DN or f UP button to
quickly move backward or forward until you reach the
desired section of the track.
Repeat Play
1
Press the REPEAT button to play back repeatedly the
track being played.
The track will be played repeatedly.
Press the REPEAT button again and select OFF to
deactivate the repeat play.
NOTES
• If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the disc
selected.
• In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In changer mode, press the “F” button twice to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
M.I.X. (Random Play)
1
Press the M.I.X. button in the play or pause mode.
The tracks on the disc will be played back in a random
sequence.
To cancel M.I.X. play, press the M.I.X. button again to
turn off the M.I.X.
NOTES
• If a CD Changer equipped with the ALL M.I.X. function is
connected, ALL M.I.X. will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback sequence.
• In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In CD changer mode, press the “F” button twice to
illuminate the "FUNC" indicator and go to step 1 within 5
seconds.
→ M.I.X. → ALL M.I.X. → (off)
Scanning Programmes
1
Press the SCAN button to activate the Scan mode.
The first 10 seconds of each track will be played back
in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTES
• In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In CD changer mode, press the “F” button twice to illuminate
the "FUNC" indicator and go to step 1 within 5 seconds.
→ RPT → RPT ALL → (off)