IDEC SE4D Type 4 Hand - Manual (Page 24)

23
Function Setting
*: The functional setting of each beam channel is as follows.
on : The muting function is effective.
oFF : The muting function is ineffective.
● CLR initializes the all settings. (factory setting)
• All beam channels: Effective
• Input condition: A = b
• Muting lamp diagnosis function setting: Effective
● When changing only the setting of the muting input condition, set it by manual setting.
The input condition can be set at SE4D series respectively.
● When initializing only the beam channel that the muting is effective, set to the auto setting in the
emission halt condition.
Notes: 1) “ALL” is displayed only when set by “Auto.”
2) Set the muting lamp diagnosis function on all SE4D series.
However, if the function has been set through CLr / Auto / ManU on each SE4D series, set the function on the SE4D
series.