IAI America CON-TG - Manual (Page 59)

49
6.
Operation:
Mode
Flow
Chart
Operation Screen Reference
13.
Input the current value during
push.
In this example, input 30%.
Input and then press
the Return key.
Press the Return key again to
move the cursor to “Range.”
* For push control, refer to the
Controller Operating Manual.
14.
Input the maximum push range
during push into the Range.
In this example, input 5 mm.
Input and then press the
Return key.
Press the key.
The screen will change to the
screen of Position No. 2 for
Push, LoTh and Range.