HTP EVC115 User Manual
Page 16
16
LP-379 REV. 3.25.14
Refer to the wiring diagrams below for field connections. All wiring must conform to local code and the National Electric Code, and
should be done by a qualified licensed electrician or the local electric utility. Grounding can be accomplished by using approved conduit
and fittings or other approved conductive material. A grounding wire is provided on the junction bracket. This grounding wire must be
used in the installation.
Figure 8
– Single Element Model Wiring Detail for EVC010, EVC015, and EVC020 Models ONLY