Harrington Hoists and Cranes SHB Trolley - Manual (Page 17)

17
3.2.3
CAUTION
Each chain container indicates the maximum length of the load chain that can be
stored in the container. The amount of chain the container must hold is equal to the lift on the hoist.
DO NOT use a chain container with a storage capacity less than the lift length on the hoist.
Canvas Chain Container
Figure 3-4 Attachment of Optional Canvas Chain Container to Hoist Body
3.2.4 When using an optional steel chain container, refer to the assembly drawing and instructions provided
with the container for correct assembly and attachment.
3.3 Installation of Trolley Hoist onto Beam
3.3.1 Assemble and adjust the trolley hoist before attempting to install it on the beam.
3.3.2 Preferred Method – Sliding the trolley hoist onto the traversing beam from the beam end is the most
convenient and recommended method. If the trolley hoist can be mounted from the end of the beam
then: Remove the trolley end-stop from the beam and set the trolley hoist on the beam from the end.
Securely re-install the trolley end stop on the beam. See
Figure 3-5 .