SKC 225-9820 VersaTrap Sampling Cassette User Manual
Versatrap spore trap cassettes, Operating instructions

VersaTrap Spore Trap Cassettes
Cat. Nos. 225-9820 and 225-9821
VersaTrap Spore Trap Cassett es
1. Select
a
fl ow rate (see Flow Rate Guide on back) and calibrate pump fl ow rate.
VersaTrap
®
Cassett es do not produce signifi cant back pressure, therefore, it is
not necessary to calibrate fl ow with a cassett e in line.
2. Remove and retain sealing tabs from cassett e inlet and outlet.
3. Connect
cassett e outlet to pump inlet.
a. Direct method: If pump accommodates direct mounting, insert cassett e
adapter into pump inlet and push cassett e outlet onto bowl end of
adapter.
b. Indirect method: Use 1/2-in ID tubing to connect cassett e outlet to pump
inlet.
4. Turn on sample pump and sample for appropriate sampling time. See
Sampling Interval Guide on back.
5. When sampling is complete, turn off pump, remove cassett e, and reseal with
sealing tabs.
6. Place sample cassett es, outdoor background samples, non-complaint
area samples, and blanks in a corrugated box and ship to a laboratory for
analysis.
Flow Rate Guide
Select the fl ow rate that will provide the desired 50% cut-point to capture the
particle size of interest.
15 L/min is recommended as an optimal fl ow rate.
Sampling Interval Guide
Following are recommended sampling times for specifi c dust conditions.
SKC recommends reducing length of sampling time when using a
30 L/min fl ow rate to prevent overloading.
Form #40063 Rev 1102
Flow Rate
50% Cut-point (μm)
VersaTrap
30.0
1.5
25.0
1.7
20.0
1.9
15.0
2.3
10.0
2.8
5.0
3.9
Recommended Sampling Intervals for the VersaTrap Air Sampling Cassette
at Typical Collection Flow Rates
Typical Environmental
Conditions
Flow rate
Collection
@ 15 L/min
Flow rate
Collection
@ 30 L/min
Clean “offi ce” or
outdoors (no visible dust)
10
minutes
5
minutes
Indoor environment,
high activity personnel
5
minutes
2
minutes
Indoor environment,
drywall renovation, or
heavy industrial dust
1
minute
1/2
minute
Operating Instructions
863 Valley View Road, Eighty Four, PA 15330 USA
Tel: 724-941-9701 Fax: 724-941-1369 e-mail: [email protected]
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy, which
provides SKC’s sole liability and the buyer’s exclusive remedy. To view the com-