SecurityMan MiniAirWatch4 - Manual (Page 16)

16
Remote Control buttons and functions
Function
Channel
Mode
Button LCD Indicator on Receiver
1 4 ~
1 4 ~
Display the input channel
Enable/
Disable
Mode "d" means the remote controller
function is disabled.
"E" means the remote controller
function is enabled.
Channel
Mode
_
+ or Display the previous or next channel
Circulation
Mode
When is pressed once, it will
display a blinking "L".
Press the again, it will display
circulator setup running " ".
Selective
Circulation
Mode
For example, you want to set channel sequence display on the TV/ Monitor
as Ch2 > Ch3 > Ch1 > Ch4. First press the once and "L" will blink on the
LCD display. Now input "2" from the remote, the number "2" will show on the
LCD, continue to input "3" > "1" > "4" and press again. The LCD will
display circulator setup running " ". And now the TV/Monitor will show the
channel sequence as Ch2 > Ch3 > Ch1 > Ch4.
When is pressed once, it will
display a blinking "L".
Select the channel sequence you
want to input and the number will
display and it will blink on the LCD
indicator, repeat until you are set.
Press the again, it will display
circulator setup running " ".