SecurityMan MiniAirWatch4 - Manual (Page 15)

15
Using Channel Switch on the Receiver
1) Press the Channel Switch ONCE, to change the channel correspon-
ding to camera. You can view one camera at a time.
> > >
(Press Channel Switch button once, it will change from
Ch1 to Ch2 on the TV/Monitor, press again to Ch3 etc)
2) Press the Channel Switch TWICE, it will loop from Ch1 to Ch4 con-
tinuously.
> > >
<
Using the Remote Control
Note: Please remove the plastic from the battery compartment before
using the IR remote control.
A
B
For first
time use,
please
remove
the plastic Press and
hold the
battery
bracket from
direction A,
and then pull
the bracket
out from
direction B
+
+
Install a
battery
with "+"
upwards
To reinstall the battery
Ch4 Ch3 Ch2 Ch1
Ch4 Ch3 Ch2 Ch1
Channel
Switch