SAMPI M-60 Meter - Manual (Page 2)

Dimensions: flow meters with electronic registration
Note: Dimensions shown are not for construction use. Consult factory when certified
engineering prints are required.
Construction and application classes
LC series M and MA PD meters are suitable for
metering a broad range of products as listed below.
The appropriate meter class can be used to specify a
desired meter by using the table on the next page of
this publication.
Class Description
Bearing
Material
1 Refined petroleum products Ni-Resist
2 Aviation and jet fuel Ni-Resist
3
Variety of product includes:
liquid sugars, sweeteners,
syrups, vegetable oils
Ni-Resist
4
Treated waters and solvents
where no red metals are
allowed
Carbon
8
Acid pH liquids includes: nitric,
phosphoric, glacial acetic acids,
citric juices, vinegar
Carbon
14 Crude oil Ni-Resist
16 General solvents Carbon
30 Herbicides Carbon
Model
Flange
size
Max nom.
Flow rate
Working
pressure
Net
weight
Dimensions
A B C D E F
M-60 4” or 6”
2800 l/min
(740 GPM)
10,5 bar
(150 PSI)
91,2 kg
(201 lbs)
in 25.4 16.6 5.6 9.1 n/a 1.5
mm 645 421 143 230 n/a 38
Dimensions
G H I J K L M N O
in 13.3 n/a 19.6 21.3 1.4 7.1 14.2 8.4 9.5
mm 337 n/a 498 540 36 181 359 213 241