SAMPI MSA-120 Meter - Manual (Page 2)

Model
Flange
size
Max nom.
Flow rate
Working
pressure
Net
weight
Dimensions A B C D
MSA-120 6” or 8”
3785 l/min
(1200 GPM)
21 bar
(300 PSI)
222,3 kg
(490 lbs)
mm 833 762 594 267
in 32.8 30 23.4 10.5
Dimensions E F G H I J K L M
mm 533 168 25 432 178 886 803 34 368
in 21 6.6 1 17 7 34.9 31.6 3.3 14.5
Dimensions: steel case flow meters
Note: Dimensions shown are not for construction use. Consult factory when certified
engineering prints are required.
Construction and application classes
LCE steel-case PD meters are suitable for metering a
broad range of products as listed below. The
appropriate meter class can be used to specify a
desired meter by using the table on the next page of
this publication.
Class Description
Bearing
Material
1 Refined petroleum products Ni-Resist
2 Aviation and jet fuel Ni-Resist
7 Chlorinated solvents Carbon
8
Acid pH liquids includes: nitric,
phosphoric, glacial acetic acids,
citric juices, vinegar
Carbon
10 LPG Carbon
14 Crude oil Ni-Resist
16 General solvents Carbon
37
Sodium Hydroxide solutions,
high sulfur crude oil, alkaline
pH liquids
Ni-Resist