American DJ Verti-Pro II User Manual
Page 2
•
This unit may blow a fuse if the maximum allotted load of 10 amps
(220v = 5 amps) is reached. If the fuse needs replacement, always
replace the fuse with same exact type that was remove. Use of a
dif
ferent type fuse from that which is recommended may cause fire or
electric shock and will void the manufactures warranty
•
To
reduce the risk of electrical shock or fi
re, do not expose this unit
rain or moisture
•
Do not spill water or other liquids into or on to your unit
•
Be sure that the local power outlet match that of the required voltage
for your unit
•
Do not attempt to operate this unit if the power cord has been frayed
or broken
•
Do not attempt to remove or break of
f the ground prong from the
electrical cord.
This prong is used to reduce the risk of electrical
shock and fi
re in case of an internal short
•
Disconnect
from main power before making any type of connection
•
Do not remove the cover under any conditions.
There are no user
serviceable parts inside
•
Never operate this unit when it’
s cover is removed
•
Never plug this unit in to a dimmer pack
•
Always be sure to mount this unit in an area that will allow proper
ventilation.
Allow about 6” (15cm) between this device and a wall
•
Do not attempt to operate this
unit,
if
it
becomes damaged
•
This unit is intended for indoor use only
, use of this product outdoors
voids all warranties
•
During long periods of non-use, disconnect the unit’
s main power
•
Always mount this unit in safe and stable matter
•
Power cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them.
• Cleaning -The fi
xture should be cleaned only as recommended by
the manufacturer
. See page 7 for cleaning details
•
Heat
-The
appliance
should
be
situated
away
from
heat
sources
such as radiators, heat registers, stoves, or other appliances
(including amplifi
ers) that produce heat.
•
The fi
xture should be serviced by qualifi
ed service personnel when:
A.
The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C.
The unit has been exposed to rain or water
.
VER
TI PRO II™
Safety Pr
ecautions
©
American DJ
®
www
.americandj.com VER
TI PRO II™ Instruction Manual Page 3
©
American DJ
®
www
.americandj.com VER
TI PRO II™ Instruction Manual Page 4
•
Linkable.
•
Audio
Sensitivity
Knob.
•
Sound-Active.
•
DMX-512 Protocol Compatible.
•
Full
Focusing.
•
Master/Slave Built-In Programs.
•
Optional V
ertiPro/C Blackout Controller
.
VER
TI PRO II™
Featur
es
VER
TI PRO II™
Contents
Introduction..........................................................................2
Features................................................................................3
Safety Precautions...................................................................4
Operation..............................................................................5
DMX
Addressing.............................................................6
Set-Up................................................................................7
Controls
&
Functions..........................................................10
Lamp
Replacement..............................................................1
1
Cleaning............................................................................12
T
rouble
Shooting............................................................12
DMX
T
raits............................................................................14
W
arranty.....................................................................15
To
optimize the performance of this product, please read these operat-
ing instructions carefully to familiarize yourself with the basic operations
of this unit.
These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this
manual with the unit, for future reference.
VER
TI PRO II™
General Instructions
VER
TI PRO II™
W
arranty Registration
The VER
TI PRO II™ carries a one year (365 days) limited warranty.
We recommend you fill out the enclosed warranty card to validate your
purchase. All returned service items whether under warranty or not,
must be freight pre-paid and accompany a return authorization (R.A.)
number. If the unit is under warranty, you must provide a copy of your
proof
of
purchase
invoice.
Please
contact
American
DJ
®
customer
support for a R.A. number.