Alliance Laundry Systems Washer - Manual (Page 14)

Programming
F232133 10 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6. Install or remove jumpers to set desired rinse
temperature or water level. Refer to Figure 1
and Table 2 for jumper configurations for
even-side options.
Options for Odd Side
Jumper Configurations Cycle Time
JP1 JP2 JP3 JP4 PreWash Wash
Rinse
1
Rinse
2
Rinse
3
Final
Spin
Cycle
Time
4 8 1.5 1.5 1.5 4 27.5
4 4 1.5 1.5 1.5 4 23.5
0 4 1.5 1.5 1.5 4 18.5
0 4 1.5 1.5 1.5 2 16.5
* 2 4 1.5 1.5 1.5 4 21.5
2 4 1.5 1.5 1.5 2 19.5
0 8 1.5 1.5 1.5 4 22.5
0 8 1.5 1.5 1.5 2 20.5
2 8 1.5 1.5 1.5 4 25.5
2 8 1.5 1.5 1.5 2 23.5
4 8 1.5 1.5 1.5 2 25.5
*Factory Setting
Table 1
Options for Even Side
Jumper Configurations
Fill
Temperature
Water
Level
Wash Action
JP1 JP2 JP3
warm low normal
cold high normal
cold low reduced**
warm high normal
* cold high reduced
warm low reduced
cold low normal
warm high reduced
*Factory Setting
**Cold/Delicate cycle must be selected for reduced wash action
Table 2