Ronan X54-3202 - Manual (Page 2)

Page 2 of 2 Rev. 0 Ronan Engineering Company
Ph: 800-327-6626 Fax: 818-992-6435 E-mail: [email protected] Web: www.ronan.com
TERMINAL ARRANGEMENT:
X54-3202
2-Wire (loop powered) Dual Ch. Universal RTD Transmitter (continued)
MECHANICAL DETAIL:
Above ranges are standard offerings for fastest deliv-
ery, and they are linearized for Platinum and Nickel
RTDs only. Contact Ronan for price and delivery of
non-standard ranges with or without linearization.
These transmitters can be configured in the field or
pre-configured at the factory to the customer’s spe-
cific RTD type and temperature range. Factory con-
figuration is only necessary if linearization is re-
quired. Only the Platinum and Nickel RTDs have
the linearized output option.
ORDERING INFORMATION:
X54-3202-(I) (II) - (I) (II)
Channel #2
Channel #1
I = RTD type (100 = 100 ohm Platinum 0.00385)
(120 = 120 ohm Nickel)
( 10 = 10 ohm Copper @ 0°C)
( 9 = 10 ohm Copper @ 25°C)
II = Standard Range code (A - G) or
specify special range; e.g. 0-450°F linearized = (0/450°F)
Example: Standard Ranges 0-500°F linearized
X54-3202-100E-100E
Example: Special Range 0-450°F linearized
X54-3202-100L(0/450°F) - 100L(0/450°F)
(add “L” after RTD type to request linearized output)
Accessories:
D2-35X7.5 35 mm X 7.5 mm “U” style DIN rail, sold per foot
*
1.) Plug-in connector design simplifies installation and
maintenance.
2.) Use up to 12 awg wiring.
3.) When inserted, case back cover provides a mechanical
cover for connector screws (as required by European
standards).
Code ºF ºC
Sensor
Types
A -40 to +40 -40 to +4 100, 120
B -40 to +104 -40 to +40 100, 120
C 32 to +100 0 to +38 100, 120,
10, 9
D 32 to +212 0 to +100 100, 120,
10, 9
E 0 to +500 -18 to +260 100, 120
F 32 to +932 0 to +500 100
G 0 to +1500 -18 to +815 100
STANDARD INPUT RANGES:
1
2
3
4
5
6
1
2
3
4
5
6
J2* J2* J1*
Ch1
Ch2
3-wire RTD
Inputs
Ch1
Ch2
Outputs
+
-
NC
+
-
NC
0.850”
21.6mm
2.47”
62.7mm
2.23”
54.6mm
5.80”
147.3mm
C L
DIN Rail