Robinair 17801B Recovery, Recycling, Recharging Unit - Manual (Page 11)

Model 17800B / 17801B Recovery/Recycling/Recharging Unit
9
ENGLISH
Setup Instructions
The.50.lb.(23kg).unit.tank.must.be.filled.with.refrigerant.before.the.unit.is.ready.
for.use.
TANK FILL
. 1.. Connect.the.96".blue.low-side.hose.to.the.liquid.valve.fitting.on.the.source.
tank..If.using.R-134a,.you.may.need.the.1/2".acme.to.low-side.adapter.
included.in.the.accessory.kit.
. Note: Some tanks have slightly different valve configurations. Be sure to
connect the blue hose to the LIQUID valve. This valve may be red on some
tanks and blue on others.
. 2.. Press. SHIFT/RESET and.ENTER.at.the.same.time;.then.press.2..The.unit.
will.begin.transferring.refrigerant.from.the.source.tank.to.the.unit.tank.
. 3.. The.unit.will.fill.the.recovery.tank.with.up.to.30.lbs.of.refrigerant.and.
automatically.stop..The.display.will.flash.“CPL”.when.the.process.is.
complete.
WARNING: To prevent personal injury,
• Wear safety goggles when working with refrigerant.
• Use only authorized refillable refrigerant tanks.
• Disconnect hoses using extreme caution!
• All hoses may contain refrigerant under pressure.
• Read and follow all warnings at the beginning of this
manual before operating the unit.