Ransburg MCV2 Modular Color Changer A10800-XX_A11077-XX - Manual (Page 24)

MAINTENANCE
Figure 7: Seat Removal
Figure 6: Valve Removal
NOTE
> When replacing or repairing any compo-
nents in this system, before reassembling,
apply a light coat of food grade
petroleum jelly to all o-rings.
GENERAL MAINTENANCE
> Prior to servicing the unit, ensure that all fluid
pressure is relieved to atmosphere. A solvent
purge should be performed if possible.
W A R N I N G
!
NOTE
> The following procedure allows valve
and/or seat removal without removing the
valve slice from the assembly.
MCV 2 Collet Series Color Changer - Maintenance
Value and Seat Removal
To remove the valve for any reason, insert the four
(4) prongs from the tool into the holes on the top the
Microvalve. Using a 1/2” socket, adjustable wrench, or
a combination box open-end wrench, turn counter-
clockwise to remove the valve.
19
To remove the seat, insert the seat removal tool
into the seat and turn counter-clockwise using a
3/8” socket, adjustable wrench, or combination box
open-end wrench.
CS-02-01.10