Rma-303 dual purge direct charge - parts, N o t e – Ransburg RMA Dual Purge Direct A12868 User Manual

Page 101

RMA-303 Dual Purge Direct Charge - Parts

LN-9267-11.3

For lengths above 15 Ft., the SAI, SAO,
and BRK require the next larger nominal
size ID tubing. This tubing is to be sup-
plied by User or Integrator.

Turbine air (TA) to be supplied at a maxi-
mum length of 6 Ft. User or Integrator
must increase to 12mm OD tube after 6 Ft.

N O T E

TURBINE AIR LINE TO BE 6 FOOT LONG

WRAP 88010-00 ELECTRICAL TAPE AROUND
ALL TUBES AND CABLES AT 2 FOOT INTERVALS

LABEL LOOSE ENDS OF TUBING WITH SIGNAL ABBREVIATION FOR IDENTIFICATION.

APPLY 7969-10 TO THREADS AS REQUIRED.

INSTALL 76566-24C (REF.) SOCKET HEAD CAP SCREWS INTO ROBOT ADAPTER.

APPLY 7969-03 TO THREADS AS REQUIRED.

TABLE A - TUBING ASSEMBLY LENGTH

DASH NO.

DESCRIPTION

AIR TUBING NOT INCLUDED

N/A

15 FT. LONG TUBING ASSEMBLY 15 FT.

30 FT. LONG TUBING ASSEMBLY 30 FT.

TABLE B - LOW VOLTAGE CABLE LENGTH

DASH NO.

DESCRIPTION

LENGTH

-----

N/A

----

A12241-15

15 FT.

A12241-25

25 FT.

A12241-40

40 FT.

A12241-50

50 FT.

A12241-75

75 FT.

LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(HARD WIRE VERSION END AT MICROPAK)

A12433-25

25 FT.

A12433-50

50 FT.

A12433-75

75 FT.

LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)

LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK

(HARD WIRE VERSION END AT MICROPAK)

LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(HARD WIRE VERSION END AT MICROPAK)

LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)

-----

A12239-06

A12433-25

A12433-50

A12433-75

------

25 FT.

------

50 FT.

------

75 FT.

LOW VOLTAGE CABLE- QUICK CONNECT TO MICROPAK
(QUICK CONNECT VERSION END TO STANDALONE MICROPAK)

A12339-25

A12239-50

A12239-75