KISAE HS 1800-60 Home Solar Kit - Manual (Page 17)

Page 17
7. SPECIFICATIONS
Note: Specifications are subject to change without notices.
Inverter Specification:
Output Current/Power:
12A/1440W continuous
15A/1800W maximum
Surge Power: 2880W peak
Output Voltage: 120 VAC/ 60 Hz
Output Waveform: Modified Sinewave
Peak Efficiency: 90%
No Load battery draw (unit in standby): < 3W
DC Input Voltage operating range: 10.5
– 15.5 Vdc
Internal AC Charger Specification:
Output Current:
5 ADC
Output Voltage (Absorption/Float): 14.8/13.5 VDC
Recharge Voltage: 12.6 VDC
Efficiency: 80%
Charger type: 3 stages (bulk/absorption/float)
Solar Panel Charger Specification:
Output Current:
8A maximum
Output Voltage: 14.8/13.5 VDC
Recharge Voltage: 12.6 VDC
Input DC Voltage: 9 - 26 VDC maximum
Efficiency: >95%
Charger Type: PWM control
Battery Specification:
Battery Capacity:
12V, 60Ah
Battery Type: Sealed Lead Acid (Deep cycle)
Regulatory Approval (ETL certify): Conforms to UL 1778
Certified to CSA C22.2 no. 107.1
8. OPTIONS FOR EXPANSION
This Home Solar Kit is a modular design. Battery capacity can easily be extended with
multiple standalone KISAE battery boxes or to external 12 Volt batteries through the
external mating connector to connect in parallel with the unit through a pre-wired built-in
internal connector located by the side of the unit. External AC or Solar chargers are
also available to improve battery charging time. For more information, please visit
www.kisaetechnology.com or talk to your local supplier.
Extend unit run time with KISAE solution:

Purchase KISAE 12V 60Ah battery box with 8A solar input port (P/N HS BX60-00)

Purchase KISAE Mating connector with wire and ring terminal (P/N HS CB175-03)
to connect your own 12 Volt battery.
Reduce battery charging time with KISAE solution:
The following options are available to improve battery charging time.

20/40A high current charger

30A DC to DC controller

30A MPPT controller

80W Solar panel