Asus P4P800-MX - Manual (Page 60)

2-22 Chapter 2: BIOS information
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Power Management/APM [Enabled]
Video Power Down Mode [Disabled]
Hard Disk Power Down Mode [Disabled]
Suspend Time Out [Disabled]
Throttle Slow Clock Ratio [50%]
System Thermal [Disabled]
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Power On By PS/2 Devices [Disabled]
Power On By External Modems [Disabled]
Power On By PCI Devices [Disabled]
Power On By RTC Alarm [Disabled]
APM Configuration
Enabled or disable
APM.
2.5.5 APM Configuration
Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM) feature.
Configuration options: [Disbaled] [Enabled]
Video Power Down Mode [Disabled]
Allows you to select the video power down mode.
Configuration options: [Disabled] [Standby] [Suspend]
Hard Disk Power Down Mode [Disabled]
Allows you to select the hard disk power down mode.
Configuration options: [Disabled] [Standby] [Suspend]
Throttle Slow Clock Ratio [50%]
Allows you to select the duty cycle in throttle mode.
Configuration options: [87.5%] [75.0%] [62.5%] [50%] [37.5%] [25%] [12.5%]
System Thermal [Disabled]
Allows you to enable or disable the system thermal feature to generate a power
management event. Configuration options: [Disabled] [Enabled]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power
button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into “off state” after an AC power
interruption. When set to [Power On], thesystem turns on automatically after a
power interruption. When set to [Last State], the system goes into whatever was
the system state (on or off) before the power interruption.
Configuration options: [Power Off] [Power On] [Last State]