Asus P4P800-MX - Manual (Page 35)

ASUS P4P800-MX motherboard 1-25
7. Chassis intrusion connector (4-1 pin CHASSIS1)
This lead is for a chassis designed with intrusion detection feature. This
requires an external detection mechanism such as a chassis intrusion sensor
or microswitch. When you remove any chassis component, the sensor triggers
and sends a high-level signal to this lead to record a chassis intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a
jumper cap. If you wish to use the chassis intrusion detection feature, remove
the jumper cap from the pins.
P4P800-MX
®
P4P800-MX Chassis Alarm Lead
CHASSIS1
+5VSB_MB Chassis Signal GND
(Default)
8. Optional GAME/MIDI connector (16-1 pin GAME1)
This connector supports an optional GAME/MIDI module. Connect the GAME/
MIDI cable to this connector. The GAME/MIDI port on the module connects a
joystick or a game pad for playing games, and MIDI devices for playing or
editing audio files.
The USB 2.0/GAME module is purchased separately.
P4P800-MX
®
P4P800-MX Game Connector
GAME1
+5V
+5V
J2B1 J2CX
MIDI_OUT
J2CY J2B2
MIDI_IN
J1B1 J1CX GND GND J1CY J1B2 +5V