Gentec-EO HP - Manual (Page 13)

Version 2.2
9
HP Series Instruction Manual Gentec Electro-Optics Inc. All rights reserved
2.2.1 PC-HP Warnings
The PC Interface show cooling water status in real time.

The flow rate and temperature are shown in black fonts in normal conditions (FIG 2.2 A).

If the water temperature is not stable a message will appear (FIG 2.2 B).

If the flow rate (FIG 2.3 A) or temperature (FIG 2.3 B) are too high or low the fonts will
change to red as a warning that the measurements will be affected.
FIG. 2-2 A & B PC-HP INTERFACE WARNINGS
FIG. 2-3 A & B PC-HP INTERFACE WARNINGS