General Tools and Instruments MMD950 - Manual (Page 5)

programmed to sound in different ways in response to different moisture
levels or operations. The correlations make it easy to use sight and/or
sound to pinpoint areas of peak or relative wetness. The beeper can be
disabled without affecting measurements.
• An auto power off function that can be triggered by three, five or
10 minutes of inactivity.
• The meter can be set up to check its calibration automatically each time
it is powered on. Alternatively, it can be programmed to allow you to
check its calibration manually at any time.
• A display icon indicates when the meter’s 9V battery is low on charge.
KEY FEATURES
• Two measurement modes: Pin (conductivity-based) and pinless (based
on the fringing field effect)
• Spherical sensor gauges moisture level up to 4 in. below a surface
• Conventional test pins at end of 46 in. remote cable
• Pin measurement accuracy of ±3%
• Displays %WME and relative readings simultaneously on two displays:
0 to 99.9 count jumbo LCD with 0.9 in. (23mm) digits, and 40-dot
tri-color LED bar graph
• Manual or automatic calibration checking
• Data hold (display lock or “freeze” function)
• User-programmable beeper function, backlight function and auto power
off time
• Low battery warning
• Includes two pairs of replacement test pins
• Spare pins storage compartment
WHAT’S IN THE CASE
The MMD950 comes in a custom molded plastic case along with a remote
pin-type probe and cable, a 9V battery, two pairs of replacement pins and this
user’s manual.
5