General Tools and Instruments LTH8809DL User Manual

Page 9

Text mode
Original mode

Second set
'SEc' displays on the top( 8809/07) or
middle (8808/06) of the monitor.

-The values for above 6 parameters
will display on the bottom of the monitor.
-Press "Up" or " Down" to adjust the
setting values.
-Press "SET" to save the setting and
enter next parameter.
-Repeat above steps to finish the whole
setting.
-Press "MODE" to return to main menu
if you don't want to save the setting.

NOTE: While in logging mode, press
START/STOP key >2 seconds to stop
logging. The parameters only could
be set while the meter is not in logging
mode.
NOTE: While in logging mode, press
SET key could enter setting
mode to "VIEW" the setting.

Y-M-D

H:M:S

8808