General Tools and Instruments DT898P - Manual (Page 2)

BATTERY INSTALLATION:
Lift off the battery cover at the back, install 1 “AAA” alkaline
battery according to the polarity indicated. Close the battery
cover.
NAME AND FUNCTIONS OF BUTTONS:
Button: Press Function: Hold 2 seconds:
MODE Time > Date
୑Time …
to set time/date
Press and hold MODE to select Hour.
Press SET to advance. Sequentially pressing
MODE again will select minutes, months, then days.
Pressing SET will advance digits.
Press MODE again to exit and confirm settings.
SET Alarm on ( ) > Snooze Alarm (zZz)> Alarm off...
Ice alert function ( ) to enable/disable
in lower LCD segment.
°C/°F °C > °F > °C ...
Time Display
to change 12/24
24hr mode display dd/mm, 12 hr displays mm/dd
MIN/MAX not applicable
IN & OUT MAX temps > IN & OUT MIN temps >
IN & OUT current temperatures ...
Displays for 8 seconds. Auto exit in 8 secs. While
MAX or MIN values displaying on screen, press
CLEAR to clear records and temperature trend.
SNOOZE not applicable
In snooze mode (icon Zz in upper LCD segment),
triggers 8-minute repeating snooze alarm.
In Normal Alarm mode (icon U appears), STOP
alarm for 1 day.
CLEAR Alarm Time & Set: to change alarm time
In normal mode, press CLEAR to read alarm time.
When reading alarm time, hold CLEAR for 2 sec.
to re-set alarm time
This product is designed for indoor use only (sensor is suitable
for outdoor use). Do not position in direct sunlight and in air
currents.
DT898P Manual-FINAL-100907 10/9/07 12:11