General Tools and Instruments CAF4224 - Manual (Page 11)

Unit Flashing %RH
60.9
25.9
℃
Unit Flashing
The measuring unit for different mode
( function ) are :
Anemometer unit m/S, Km/h, FPM, mph, Knot
Temp. unit ,
℃ ℉
Barometer unit hPa, mmHg, inHg.
Humidity unit %RH
Dew point ,
℃ ℉
*
After the unit is selected, it will be memorized into
the memory circuit. If power off and on again will
present the existing selection unit.
5-3 Anemometer measurement
1)Turn on the meter by pressing the " Power Button "
( 3-3, Fig. 1 ) momentarily.
2)For the above 5-1 mode ( function ) selection, please
set to :
c. Anemometer/Temp.
( Upper display show air velocity value, lower
display show Temp. value )
f. Barometer/Anemometer
( Upper display show atmosphere value , lower
display show air velocity value )
9