Sm series, General pump – General Pump SM Owners Manual User Manual

Page 16

Page 16

GENERAL PUMP

A member of the Interpump Group

SM SERIES

9.10 V-belt Transmission

As indicated in point 9.1, the pump can be controlled by a v-belt system only in exceptional cases. For proper layout

sizing, consult our Customer Service Department

9.11 Transmission of power from the second crankshaft

SM series pumps can, upon request, be supplied with an auxiliary power outlet on the opposite side of the activation.

Transmission can be carried out:

• By means of the V-belts

• By means of the joint

By means of the V-belt, withdrawable max torque is 111 ft. lbs (150 Nm) corresponding to 17 HP (12.5 Kw) at 800 RPM.

By means of the joint, withdrawable max torque is 162 ft. lbs. (220 Nm) corresponding to 25 HP (18.4 Kw) at 800 RPM.

With transmission by means of the joint, pay particular attention to perfect alignment so that no

transverse forces are generated on the pump shaft.

For applications differing from those specified above, contact our Customer Service Department.

Ref 300893 Rev.A

06-12