Finish Thompson FM1000 Series - Manual (Page 3)

Safety
ALWAYS wear protective clothing, eye protection and follow standard safety procedures when handling
corrosive or personally harmful materials.
NEVER use this flow meter with flammable or combustible liquids.
NEVER use this flow meter in a hazardous environment.
ALWAYS verify chemical compatibility with the flow meter and pump materials of construction before operation.
ALWAYS make sure the pump and hose are properly supported.
ALWAYS use a chemically compatible hose rated for the temperature of the product being pumped.
ALWAYS place pump tube in liquid before starting.
Introduction
Thank you for purchasing an FM-1000 Series electronic flow meter. The FM-1000 Series is designed to measure the flow of a fluid being
dispensed from Finish Thompson’s PFP, PFM, & PFV drum pumps. The meter is factory calibrated and displays information on an LCD display.
Two AAA batteries power the unit for up to one year. There are two models available with options for materials of construction and measure-
ment units.
FM-1000-T is a totalizer meter – designed to measure and display the total flow.
FM-1000 RT is a rate/totalizer meter – designed to measure and display both the rate of flow and the total flow.
Specifications
Maximum Working Pressure: 35-62 PSIG (2.4 – 4.3 bar)
Maximum Fluid Temperature: PFM & PFP Models = 160º F (71º C); PFV = 120º F (49º C)
Ambient Temperature Range: 32º to 110ºF / 0º to 43º C
Enclosure: NEMA 4X (IP56)
Sensor/Paddle/Axle Material: PVDF
O-ring seals: Viton
Accuracy: +/-1% of full-scale rate reading
Repeatability: +/-1% of full-scale rate reading
Power Requirements: Two standard AAA alkaline batteries (included)
Battery Life Expectancy: 1 year minimum
Maximum Viscosity: 20 cP/mPas
Maximum Specific Gravity: 1.8
Features
• Easy to read .35” high, six digit LCD display
• Installs quickly on PFM, PFP, PFV Series pump tubes with supplied fittings
• Factory calibrated –nothing to program
• Minimal maintenance required
• Corrosion resistant PVDF sensor with polypropylene or PVDF body, ABS electronics enclosure
• Weather resistant enclosure
• High accuracy
• Total reset function can be disabled
Kit Contents:
• FM-1000 Series Meter
• Flow meter adapter
• Discharge nut
•1” NPT coupling
• Hose barb adapter
1